Product range
TCT and PCD circular saw blades, edgebander jointing and pre-milling cutters, solid carbide router bits and high-speed cold saw blades. Each product page carries the full specification table, the machine the tool fits, and the part number it replaces.
PCD polycrystalline diamond circular saw blades for woodworking panels. Pagoda (Kunlun), flat and trapezoidal tooth shapes cut single or double-sided melamine, HPL and veneered board with a clean finish on both faces, without a scoring saw.
PCD saw blade with the KUNLUN large-tip profile for chip-free double-sided veneered panel, MDF, plywood, OSB and melamine board, without a scoring saw.
High-frequency welded diamond blade for granite, 300 to 800 mm, 40 mm segment with 12 to 16 mm height, bore 50 or 60 mm, for bridge saws and block cutters.
Diamond blade for concrete, 350 to 800 mm, 40 mm segment with 15 mm height and 50 or 25.4 mm bore, for road saws, floor saws and cut-off saws.
Diamond blade for Dekton, 250 to 400 mm, thin 2.2 to 2.6 mm segment with 10 mm height and 50 mm bore, for bridge saws cutting ultra-compact sintered stone.
Diamond segmented circular saw blade for marble, 350 to 600 mm, 40 mm segment with 8 to 10 mm height, bore 50 or 60 mm, for bridge saws and wet cut-off saws.
Carbide tipped dry cut saw blade for cutting steel without lubricant: tube, angle steel, C-channel, hanger rail, raceway, roof deck, stud bolts and small-diameter rod.
Cermet tipped circular saw blade for solid steel sections and medium to high carbon steel, running cooler than carbide with a better surface finish.
PVD coated carbide circular saw blade for flying cut-off machines cutting heavy steel and tube, with shock-resistant teeth ground to the section being cut.
HSS M2 and M35 circular saw blades with TiN, TiCN or TiAlN PVD coating, 200 to 500 mm, 64 to 65 HRC, for cold saws cutting steel tube, bar and section.
PCD diamond circular saw blade 250 x 2.2/1.7 x 30 mm, 12 teeth, for fiber cement board, cement particle board, concrete tile and engineered stone.
TCT circular saw blade 255 x 2.0/1.5 x 25.4 mm, 52 teeth, for cutting mild steel tube, pipe, bar, angle and profile on dry cut-off saws.
Technical notes
Application notes on tooth geometry, tip grade and edge life, written for the person who specifies the blade.
When PCD diamond router bits beat solid carbide on a CNC nesting router, how to compare cost per linear metre instead of price per bit, and which flute geometry suits MDF, chipboard and melamine.
How to specify a PCD jointing cutter for an edgebander: the four dimensions that decide fit, Z2+2 versus Z3+3, which LEUCO part numbers cross to which machine, and when a cutter needs replacing.
What a clearing tooth does on a sawmill TCT blade, why 400 mm with 24 main teeth and 4 clearing teeth works, and what to send before a blade price can be quoted.
