CNC Router Bits
Two Flute Ball Nose Up-Cut Spiral Solid Carbide Router Bit for 3D Carving
Two-flute ball nose up-cut spiral solid carbide router bits, 0.8 mm to 20 mm cutting diameter, for 3D carving, contouring, fluted columns and radiused edges.
Product range
Saw blades, edgebander cutters and router bits
TCT and PCD circular saw blades, edgebander jointing and pre-milling cutters, solid carbide router bits and high-speed cold saw blades. Each product page carries the full specification table, the machine the tool fits, and the part number it replaces.
CNC Router Bits
5 products
View product
CNC Router Bits
Down-Cut 2 Flute Solid Carbide Spiral Router Bits for Wood and Laminate
Down-cut 2-flute solid carbide spiral router bits, 3.175 mm to 12.7 mm cutting diameter, for grooves, dadoes and inlays in veneered and laminated board.
CNC Router Bits
PCD Diamond Spiral Router Bits for CNC Nesting and Panel Machining
PCD spiral router bits for CNC nesting in MDF, chipboard, plywood and melamine, Z=1+1 to Z 3+3, 3.175 to 12.7 mm shanks, for high-feed panel cutting.
CNC Router Bits
TCT Straight Flute Router Bits for Laminate, MDF and Acrylic Trimming
Solid carbide TCT straight flute router bits for trimming laminate, MDF, chipboard and solid surface, 3.175 to 12.7 mm shanks, single and double flute.
CNC Router Bits
Compression Spiral Router Bits for Double-Sided Melamine and Veneer Panels
Compression spiral router bits with down-cut tip and up-cut body, for chip-free cutting of double-sided melamine, veneered and HPL panels on CNC nesting routers.
Technical notes
Notes on tooth geometry and tip grade
Application notes on tooth geometry, tip grade and edge life, written for the person who specifies the blade.
Technical Guides
PCD vs Solid Carbide CNC Router Bits: Cutting Cost per Metre in Panel Nesting
When PCD diamond router bits beat solid carbide on a CNC nesting router, how to compare cost per linear metre instead of price per bit, and which flute geometry suits MDF, chipboard and melamine.
Technical Guides
Edgebander Pre-Milling Cutter Selection Guide: Z2+2 vs Z3+3, Sizes and LEUCO Cross-Reference
How to specify a PCD jointing cutter for an edgebander: the four dimensions that decide fit, Z2+2 versus Z3+3, which LEUCO part numbers cross to which machine, and when a cutter needs replacing.
Sawmill TCT Saw Blades with Clearing Teeth: 400 mm, 24 Teeth and 4 Clearing Teeth
What a clearing tooth does on a sawmill TCT blade, why 400 mm with 24 main teeth and 4 clearing teeth works, and what to send before a blade price can be quoted.