HZ Tooth Saw Blades for Perfect Surface on Laminated Panels: Ø303×2.5×30×Z60 Technical Guide

Laminated and veneered overlay panels in 19 mm thickness demand the highest cut quality on CNC machines. The HZ tooth saw blade — with its concave hollow-face tooth geometry — is engineered specifically for this application, delivering a finish that requires no post-processing or edge banding touch-up.
The Ø303×2.5×30×Z60 specification explained
The HZ tooth blade for panel sizing features a 303 mm diameter with a 2.5 mm kerf, 30 mm bore, and 60 teeth. The 60-tooth configuration provides a fine feed per tooth that minimises chipping on both the decorative surface and the backing material. The 2.5 mm kerf reduces material waste while maintaining blade stability at CNC feed rates.
The blade body includes expansion slots (spiral and hook-shaped) that reduce heat buildup and noise during high-speed CNC cutting. The 30 mm bore with reduction rings (Ø42, Ø46.5, Ø60) allows mounting on a wide range of CNC beam saws and nesting machines.
Tooth geometry that delivers a perfect surface
The HZ (hollow-face) tooth design combines a 12° positive hook angle with a 15° clearance angle and a concave face grind. The R3 tooth radius at the cutting edge distributes cutting forces evenly, preventing micro-chipping on melamine, foil and paper surfaces. The 2.7 mm tip width provides adequate carbide volume for extended tool life between sharpenings.
This geometry produces cuts that meet the highest surface quality standards on double-sided coated chipboard, MDF and multi-layer panels — without the need for a scoring blade. The concave face grind reduces the contact area between the tooth and the material, lowering cutting forces and heat generation.
Technical drawings
The technical drawings below show the full tooth layout, expansion slot pattern and bore geometry for the Ø303×2.5×30×Z60 HZ tooth blade. The drawings include the 12° hook angle, 15° clearance angle, R3 tooth radius and the 2.7 mm tip width specification.
CNC machine compatibility
The Ø303 mm diameter is optimised for CNC beam saws and nesting machines with a cutting height capacity of up to 80 mm. Recommended RPM range is 3,500 to 5,900 depending on the machine spindle and feed rate. The blade is compatible with HSK 63 tool holders and standard 30 mm bore flanges used on major CNC panel processing machines.
Frequently asked questions
Can the HZ tooth blade cut without a scoring blade?
Yes. The concave hollow-face tooth geometry is designed to produce a clean cut on both sides of coated panels without chipping, eliminating the need for a scoring blade on many CNC machines.
What materials can the Ø303×Z60 blade cut?
The blade is optimised for laminated and veneered overlay panels in 19 mm thickness, including melamine-coated chipboard, MDF, foil-laminated panels and paper-overlay materials. It also performs well on solid wood and plywood.
How long does the blade stay sharp?
Tool life depends on the abrasive content of the panel surface. On standard melamine-coated chipboard, the carbide tips typically last 2,000 to 3,000 linear metres before resharpening is needed. The blades can be resharpened multiple times.
Work with the manufacturer
Pingxiang Xinchen Furnace supply HZ tooth saw blades and precision cutting tools from our production facility in China. Contact us at ferrytk898@gmail.com, tooth counts and private-label production.



