HZ/DZ Hollow Tooth Saw Blades: How Concave Geometry Achieves Scoring-Free Cuts on Coated Panels

HZ tooth overview drawing
Double-sided coated panels — melamine, foil, paper overlay — are among the most challenging materials for saw blades. The decorative surface chips easily, and the backing material tears out on the exit side. Traditional solutions require a scoring blade running on the opposite side of the panel. The HZ/DZ hollow tooth design eliminates that requirement.

The concave hollow-face advantage

Conventional flat-top grind (FTG) or alternate top bevel (ATB) teeth have a flat or angled face that contacts the panel surface across the full tooth width. The HZ/DZ concave face grind reduces this contact area to a narrow band at the cutting edge, significantly lowering the cutting force perpendicular to the panel surface.
The result: the decorative layer is sheared cleanly rather than pushed or lifted, preventing the micro-chipping that defines the edge quality on coated panels. The R3 tooth radius further smooths the cutting action by eliminating sharp transitions at the edge.

Tooth geometry specifications

The HZ/DZ hollow tooth design for coated panels features: 10° positive rake angle for aggressive material removal, R3 tooth radius for reduced surface damage, carbide tips with fine-grain microstructure for extended life, and a hollow-face grind that concentrates the cutting force at the edge. The tooth pitch is optimised for a feed per tooth of 0.08 to 0.15 mm on CNC machines.

Comparison with scoring blade systems

A scoring blade system requires a second spindle, precise alignment between the scoring blade and the main blade, and additional setup time for each panel thickness change. The HZ/DZ hollow tooth blade achieves comparable edge quality without this complexity, reducing machine downtime and simplifying operation. On machines where a scoring unit is already installed, the HZ/DZ blade can be used as the main blade for even better results.

Available sizes

HZ/DZ hollow tooth blades are available in Ø220 mm (Z42-Z56), Ø250 mm (Z48-Z72), Ø303 mm (Z54-Z72) and Ø350 mm (Z60-Z84) diameters, with 30 mm bore and FT01 side bore holes for CNC beam saws. Custom diameters and tooth counts are produced to order.

Frequently asked questions

Does the HZ/DZ blade work on both melamine and veneer?

Yes. The concave face geometry handles both synthetic coatings (melamine, foil) and natural wood veneers. The key is matching the tooth count to the panel thickness and the feed rate to the machine.

Can the blade be resharpened?

Yes. The carbide tips can be resharpened multiple times by a qualified saw service. The hollow-face grind is maintained during resharpening to preserve the cutting geometry.

Work with the manufacturer

Pingxiang Xinchen Furnace produces HZ/DZ hollow tooth saw blades for distributors and CNC workshops worldwide. Contact ferrytk898@gmail.com, private-label production and technical support.

Read next

More technical notes

Further notes on tooth geometry, edge life and tool selection.